Previous Home Next
Down by the radiatorFriday, June 06, 2008
After trying to strip the baseboard wood in the radiator/window alcove, I decided to just rip it out and take it to the basement for some through stripping and sanding...

After a couple coats of stripper to get most of the paint off, I decided to do a little sanding to try to clean up the center section which had never been stained, sealed, or painted. While there's still a significant difference from the once-protected wood, this will be behind the radiator so I think it's going to be just fine...

Then it was time to reinstall the pieces in the bedroom...

Previous Home Next
blog comments powered by Disqus